Our blasting systems and finishing systems are designed to stand up to the toughest jobs. Whether you use corn cob grit media to blast a log home, pumice powder abrasive for facial and body scrubs, walnut shells or plastic media to restore vehicles, or stainless steel tumbling media for burnishing silverware, we provide recommendations to make sure your project is done properly.
 |
Log home blasting with corn cob blasting grit is the best technique to maintain and preserve the interior and exterior wood of your log home, removing dirt and debris and restoring its original appearance. |
 |
Microdermabrasion is a procedure in which the skin is "blasted" with micro-fine particles of white aluminum oxide or corundum particles to help remove mild or light scarring from acne or fine lines and wrinkles. |
 |
Just about any floor surface that routinely gets doused slippery substances should be treated with non-skid coatings to prevent falls and injuries and is well worth the investment of time and money. |
 |
Blast cleaning pool tiles is a relatively easy and fast way to remove calcium and mineral deposits left from the water line on the tile edging. |
 |
Pumice is a volcanic ash which is formed when lava is permeated with gas bubbles during the solidification process. It is used as a mild but effective abrasion suitable for a multitude of uses. |
 |
Burnishing silverware is an economical resolution to repairing the nicks, scratches and scrapes received daily in the restaurant business. Commercial burnishing systems will extend the life of your tableware, restore the beauty and shine and save you money. |
 |
Whether you are a "DIY" enthusiast, paint and body technician or body shop owner, having effective portable blasting equipment is a necessity. |
 |
Pressure blasting a boat is an effective way to strip the paint off of the hull in order to prepare the body for refinishing and or repair. |
 |
Clean and polish spent brass cartridge casings with a vibratory bowl finisher to save on ammunition costs. |
 |
Mass jewelry polishing systems and jewelry burnishing has quickly become the most effective time and money saving tool as compared to the more traditional hand finishing techniques. |
 |
Restoring wood to its original condition can be successfully accomplished by blast cleaning with corn cob grit. |
 |
Blast cleaning compression and injection molds is effective, timely and cost efficient, while achieving the desired result with minimal downtime and no wear on the tooling. |
