Mass Finishing Equipment at Kramer Industries Inc Home Home Home ShopTalk Blog Search Help Cart Contact
Blasting SystemsRight From The Start - Call us at 1-888-515-9443
HDP Series

HDP Series Heavy-Duty Direct Pressure Cabinets

www.KramerThinksGreen.com logo
HDP6048 HDP Series Heavy-Duty Direct Pressure Blasting System Rear View
HDP6048 HDP Series Heavy-Duty Direct Pressure Blasting System Port

Feed Screw


HDP Silencer

Silencer

Features & Media to Use

The HDP Series Direct Pressure Blasting Cabinet Systems are designed for maximum productivity and operating efficiency and engineered for high performance. The HDP Blast Cabinet Systems are efficient and easy to use. This series is the optimal choice for compression mold cleaning, extrusion die cleaning and stripping applications. Built to last, these heavy-duty units incorporate system features to enhance part cleaning, such as an improved dust collection system for better visibility and an optional intake port to handle the difficult task of blasting long parts such as tubing, framing and feed screws.

The HDP Series Direct Pressure Blast Cabinets can be used with a variety of media including Plastic Abrasive Blast Media, Walnut Shell Grit, Glass Beads, Aluminum Oxide, Silicon Carbide and Corn Cob Grit. Each HDP Series Direct Pressure Blasting Cabinet features rugged construction (continuously welded 12 gauge steel) and a heavy-duty turntable with extensions (2,500 pound capacity) to accommodate heavy and difficult-to-handle parts. Combining the media reclaimer and dust collection system into one unit frees up valuable floor space. A vertical door provides access for easy part entry and exit.

Questions? Contact Us

Dust Collection System

The HDP Series Direct Pressure Blasting Cabinet's dust collection system is designed to keep dust away from the operator's window for increased visibility and accuracy when cleaning. Each model (except Model HDP2424) comes standard with a 1,210 CFM dust collection system that can be easily upgraded to a 5 HP, 1,585 CFM system (standard on Model HDP9648). The high-capacity, 1.6 ft³ pressure pot allows for extended blasting times relative to the 1.0 ft³ industry norm.

Five models of the HDP Series Direct Pressure Blasting Cabinets are available, depending on your specific applications.

Model Features & Specs



Heavy-Duty Direct Pressure Cabinet Features & Parts

Heavy-Duty Direct Pressure Cabinet Features & Parts

Cabinet

12-gauge reinforced continuously welded steel construction.

60 degree minimum sump media flow.

1 swing side door and 1 vertical side door (only 1 door on HDP2424)

Durable enamel finish - primed, painted and corrosion resistant.

Moveable foot valve.

Dust collector and media reclaimer redesigned to fit into compact footprint.

Working Chamber

Safety door interlocks.

Self adjusting door latch.

Knife-edge, self-sealing, full gaskets.

Full-length hinges.

Turntable.

Track assembly (not included on Model HDP2424).

Doors

Two doors (1 swing side door and 1 vertical door) are standard on most models, except Model HDP2424, which has just one door on the right side.

View Window

Front-round corner 13 1/2" x 28 1/2"

Side-round corner 7 1/2" x 11"

Pressure Pot

ASME coded, 1.6 ft3 capacity.

Remote controlled.

Automatic refilling.

Sight glass to view media level.

Gloves

Abrasive resistant, full length 8".

Static resistant gauntlet.

Hoses

1/2" 4-ply heavy-duty.

Whip end blast hose.

Blast Nozzle

1/4" long boron carbide with an aluminum jacket.

Silicon liner, urethane jacket.

Approximate Air Requirements (CFM)
3/16" nozzle: 22 CFM at 40 PSI and 30 CFM at 60 PSI
1/4" nozzle: 40 CFM at 40 PSI and 55 CFM at 60 PSI
5/16" nozzle: 70 CFM at 40 PSI and 90 CFM at 60 PSI

Blow-Off Nozzle

Fingertip control blow-off nozzle.

Dust Collector

2 HP, 2 cartridge, 1210 CFM dust collector standard.

Model HDP9648 comes standard with a 5HP, 4 cartridge, 1585 CFM dust collector.

Additional Upgrades

Silencer (26" high)

Easel

Porthole - specialized port to allow for easy cleaning of feed screws (see picture above)

Auto Pulse Jet Filter Cleaning

Automatic Rotating Turntable

Automatic Chain Driven In/Out Turntable

5 HP, 4 Cartridge Dust Collector

Upgrade to 4,000 pound capacity

Automated Open/Close Vertical Door

click on highlighted model number to view picture

Heavy-Duty Direct Pressure Cabinet Measurement Specifications

Heavy-Duty Direct Pressure Cabinet Measurement Specifications

Model

Dimensions


(width x height x depth)
floor space includes dust collector

Swing Door
Opening


(width x height)

Vertical Door Opening


(width x height)

Height Clearance


(from top of turntable)
HDP2424 Inside:
24" x 24" x 24"
Floor Space:
84" x 127" x 92"
19 1/2" X 17 1/2" N/A N/A
HDP4836 Inside:
48" x 36" x 36"
Floor Space:
108" x 127" x 104"
31 1/2" X 29 1/2" 32" X 27 1/2" 20"
HDP6048 Inside:
60" x 48" x 48"
Floor Space:
120" x 127" x 116"
43 1/2" X 41 1/2" 44" X 39 1/2" 32"
HDP6060 Inside:
60" x 60" x 60"
Floor Space:
120" x 127" x 128"
55 1/2" X 53 1/2" 56" X 51 1/2" 44"
HDP9648 Inside:
96" x 48" x 48"
Floor Space:
156" x 127" x 116"
43 1/2" X 41 1/2" 44" X 39 1/2" 32"


HDP Series Model Specifications - Features

Heavy-Duty Direct Pressure Cabinet Model Features

Model

Flood Lights

Dust Collector Filter Area

Blower HP and CFM at 1" S.P.

Electrical

HDP2424 2 lights;
180 watts total
DC100
75 ft²
1 HP;
775 CFM
115/208-230 V
1 Phase, 60 Hz
12/6 FLA
HDP4836 4 lights;
360 watts total
DC200
150 ft²
2 HP;
1210 CFM
208-230/460 V
3 Phase, 60 Hz
5.6/2.8 FLA
HDP6048 4 lights;
360 watts total
DC200
150 ft²
2 HP;
1210 CFM
208-230/460 V
3 Phase, 60 Hz
5.6/2.8 FLA
HDP6060 4 lights;
360 watts total
DC200
150 ft²
2 HP;
1210 CFM
208-230/460 V
3 Phase, 60 Hz
5.6/2.8 FLA
HDP9648 8 lights;
1080 watts total
DC500
225 ft²
5 HP;
1585 CFM
208-230/460 V
3 Phase, 60 Hz
14.0/7.0 FLA