Portable Sandblasting Equipment Accessories

Moisture Separator
A heavy-duty moisture separator that is designed to dry the air supplied by the compressor. These air line filters can handle up to 250 psi and 525 cfm air flow. The bowl will hold up to 32 ounces of liquid and includes a site glass. The water is drained through a valve on the bottom of metal bowl. The Moisture Separator is attached to the pressure pot easily with a pipe nipple.

Pressure Regulator
The Pressure Regulator is designed to monitor and modify the air pressure inside the pressure pot. This upgrade will allow for more control over the actual blasting pressure at the nozzle. Pressure drops with long air hoses from the compressor can be found and adjusted to provide a consistent blasting pressure over time leading to more consistent blasting performance and results.

Media Screens
Available in two different sizes, these screens will separate debris from any media. Keeping the media clean will prevent clogging nozzles from paint chips, rust and other particles. Longer lifetime of the media can be achieved by reusing abrasives. The screens can be placed on top of the concave top of the pressure pots. The Coarse Media Screen is ideal for 36 Mesh or 20/40 mesh and finer abrasives. The Fine Media Screen is designed for 60 Mesh or finer abrasives.

Metal Blasting Basket
The metal blasting basket is used for blasting small parts such as nuts and bolts. The basket will hold parts as small as ³/16" and allow blasting with media as large at 6 Mesh. The basket has a durable, metal handle for ease of use during blasting. The Metal Blasting Basket can be used with the Heavy Duty PPB Series, PPB Series and inside blasting cabinets.

Air Supplied Helmet
Affords use with full comfort and protection against abrasive ricochet and dust. Bears NIOSH approval number TC-19C-84. Helmets of this design are necessary for operations in blast cleaning rooms, inside of tanks and other confined areas and are required on many open-air operations of heavy duty and lengthy work periods to meet OSHA standards.

Made of refined, one-piece molded high-density polyethylene with special coated nylon cape for durability. Adjustable dihedral headband suspension affords user sizing range comfort. Hinged gasket-sealed vision frame affords maximum vision range with easy change of vision lens. Supplied with S-46-4 HP belt and brake valve assembly.

The 600HP Air Supplied Helmet is designed for use with the Air Line Filter and should be connected to a standard air compressor using the ³/8" Air Hose. We recommend using an electric compressor to ensure that no toxic gases are present in the air stream. If a gas or diesel compressor is being used, we highly recommend using the Carbon Monoxide Monitor as a safety precaution. As an alternative, the 600LP Air Supplied Helmet can be attached to the Oil-less Air Pump (using the ¹/2" Air Hose) for a clean and safe air supply.

Venturi Blast Nozzles
The Venturi suction system allows high velocity air pressure to pass over the abrasive feeder line, which sucks the abrasive through the smaller hose and combines it with air pressure at the back of a nozzle. The gun nozzle is a tapered smaller orifice that speeds up the combined flow and sprays out the abrasive in a relatively narrow or fixed pattern of discharge. The SLV Series Nozzles are our latest design of high production blast nozzles. These nozzles are manufactured with a one-piece sintered tungsten carbide liner for extended production life. The liner also allows for slow and even wear throughout the life of the nozzle. A new combination of aluminum and polyurethane adds proven advantages in weight balance, strength and shock absorbent features not found in metal cased nozzles. The long venture design will maximize production requirements as well as give added abrasive impact when needed for tough, hard to clean surfaces.

Compressed Air Line Filter Assembly
Type "A" Air Line Filter Assembly provides clean breathing air to the user because it removes dusts, moisture, oil, fumes and scale from compressed air. Meets ASME Code requirements. Its component compounds are entirely separate from the water and oil condensation changer to prolong the life of the replaceable filtering compound unit. Type "A" Air Line Filter Assembly is recommended for all air supplied helmets and has a capacity to afford clean breathing air to as many as six helmets.

Caution: Compressed Air Line Filters do not remove carbon monoxide.

Oil-less Air Pumps
Oil-less Air Pump is available for one operator with a ³/4 HP electric motor. This Air Pump is designed for NIOSH approved air supplied helmets that operate at 10 psi or less. The inlet must be placed in a clean, breathable location, free from exhausts, fumes and dust. The Air Pump will not remove carbon monoxide or toxic gases from incoming air pumps to the helmets. The Air Pump requires a 110-115V, 60Hz, 14 amp power supply and has an air outflow of 9 cfm at 10 psi. The 600LP Air Supplied Helmet used with the Air Pump and is connected using the ¹/2" Air Hose. No compressor is necessary when using the Oil-less Air Pump and 600LP Air Supplied Helmet.

Leather Blast Suit
Available in sizes small to XXL.

Carbon Monoxide Monitor
The ISA-34RAL respiratory air line CO Monitor/Alarm automatically and continuously monitors respiratory air lines for carbon monoxide levels and provides audible and visual alarms when the air line CO concentration rises above a preset limit. When the level of CO in the air passing the sensor increases to the preset value, the equipment alarms and relays activate. The preset calibration level may be as low as 20 PPM. The equipment operates from either 117 VAC or 12 VDC, at the option of the user, with terminals for either mode of operation located on a barrier strip inside the unit. Due to its electronic voltage regulation, the ISA-34RAL maintains precision gas calibration despite input voltage variations as great as –10% to +20% of rated supply (either AC or DC).

Machine Depressurization System
Places complete on-off control machine in hands of operator at blast nozzle. Provides added safety to the operator and others because the machine is automatically depressurized if the operator loses control of the blast hose. Reduces abrasive consumption when the operator changes position or is performing spot blasting work, because the operator can start or stop the abrasive blast at will. A machine depressurization system makes blasting economical and practical for safe one-man operation. Serves as a signaling device between operator and helper when blasting tank interiors, and other confined areas or when operator works out of helper’s sight. Delivers “fail safe” remote control performance because the blast machine will not operate in the event either or both control hoses are accidentally crushed, pinched or severed.