HDP6048
The Heavy-Duty DP Series Direct Pressure Blasting Cabinet Series is designed for maximum productivity and operating efficiency and engineered for high performance. The Heavy-Duty DP Blast Cabinet Series is efficient and easy to use. This series is the optimal choice for compression mold cleaning, extrusion die cleaning and stripping applications. Built to last, these heavy-duty units incorporate system features to enhance part cleaning, such as an improved dust collection system for better visibility and an optional intake port to handle the difficult task of blasting long parts such as tubing, framing and feed screws.
The Heavy-Duty DP Series Direct Pressure Blast Cabinets can be used with a variety of media including
Plastic Abrasive Blast Media,
Walnut Shell Grit,
Glass Beads,
Aluminum Oxide,
Silicon Carbide and
Corn Cob Grit. Each Heavy-Duty DP Series Direct Pressure Blasting Cabinet features rugged construction (continuously welded 12 gauge steel) and a heavy-duty turntable with extensions (2,500 pound capacity) to accommodate heavy and difficult-to-handle parts. Combining the media reclaimer and dust collection system into one unit frees up valuable floor space.
A vertical door provides access for easy part entry and exit.
The Heavy-Duty DP Series Direct Pressure Blasting Cabinet’s dust collection system is designed to keep dust away from the operator’s window for increased visibility and accuracy when cleaning. Each model (except
Model HDP2424) comes standard with a 1,210 CFM dust collection system that can be easily upgraded to a 5 HP, 1,585 CFM
system (standard on Model HDP9648). The high-capacity, 1.6 ft³ pressure pot allows for extended blasting times relative to
the 1.0 ft³ industry norm.
Five models of the Heavy-Duty DP Series Direct Pressure Blasting Cabinets are available, depending on your specific applications.
Heavy-Duty DP Series Specifications
12-gauge reinforced continuously welded steel construction.
60 degree minimum sump media flow.
1 swing side door and 1 vertical side door (only 1 door on HPB2424)
Durable enamel finish - primed, painted and corrosion resistant.
Moveable foot valve.
Dust collector and media reclaimer redesigned to fit into compact footprint. |
Safety door interlocks.
Self adjusting door latch.
Knife-edge, self-sealing, full gaskets.
Full-length hinges.
Turntable.
Track assembly (not included on Model HDP2424). |
| Two doors (1 swing side door and 1 vertical door) are standard on most models, except Model PB2424, which has just one door on the right side. |
Front-round corner 13
1/2" x 28
1/2"
Side-round corner 7
1/2" x 11" |
ASME coded, 1.6 ft3 capacity.
Remote controlled.
Automatic refilling.
Sight glass to view media level. |
Abrasive resistant, full length 8".
Static resistant gauntlet. |
1/2" 4-ply heavy-duty.
Whip end blast hose. |
1/4" long
boron carbide with an aluminum jacket.
Silicon liner, urethane jacket.
Approximate
Air Requirements (CFM)
3/16" nozzle: 22 CFM at 40 PSI and 30 CFM at 60 PSI
1/4" nozzle: 40 CFM at 40 PSI and 55 CFM at 60 PSI
5/16"
nozzle: 70 CFM at 40 PSI and 90 CFM at 60 PSI |
| Fingertip control blow-off nozzle. |
2 HP, 2 cartridge, 1210 CFM dust collector standard.
Model HDP9648 comes standard with a 5HP, 4 cartridge, 1585 CFM dust collector. |
Silencer
Easel
Porthole - specialized port to allow for easy cleaning of feed screws (see
picture above)
Auto Pulse Jet Filter Cleaning
Automatic Rotating Turntable
Automatic Chain Driven In/Out Turntable
5 HP, 4 Cartridge Dust Collector |
click on highlighted model number to view picture
Heavy-Duty DP Series Model Specifications - Measurements
| Model |
Dimensions
(width x height x depth)
floor space includes dust collector |
Swing Door
Opening
(width x height) |
Vertical Door Opening
(width x height) |
Height Clearance
(from top of turntable) |
| HDP2424 |
Inside:
24" x 24" x 24"
Floor Space:
84" x 127" x 92" |
19 1/2"
X 17 1/2" |
N/A |
N/A |
| HDP4836 |
Inside:
48" x 36" x 36"
Floor Space:
108" x 127" x 104" |
31 1/2" X 29 1/2" |
32" X 27 1/2" |
20" |
| HDP6048 |
Inside:
60" x 48" x 48"
Floor Space:
120" x 127" x 116" |
43 1/2"
X 41 1/2" |
44" X 39 1/2" |
32" |
| HDP6060 |
Inside:
60" x 60" x 60"
Floor Space:
120" x 127" x 128" |
55 1/2"
X 53 1/2" |
56" X 51 1/2" |
44" |
| HDP9648 |
Inside:
96" x
48" x 48"
Floor Space:
156" x 127" x 116" |
43 1/2"
X 41 1/2" |
44" X 39 1/2" |
32" |
Heavy-Duty DP Series Model Specifications - Features
| Model |
Flood Lights |
Dust Collector Filter Area |
Blower HP and CFM at 1" S.P. |
Electrical |
| HDP2424 |
2 lights;
180 watts total |
DC100
75 ft² |
1 HP;
775 CFM |
115/208-230 V
1 Phase, 60 Hz
12/6 FLA |
| HDP4836 |
4 lights;
360 watts total |
DC200
150 ft² |
2 HP;
1210 CFM |
208-230/460 V
3 Phase, 60 Hz
5.6/2.8 FLA |
| HDP6048 |
4 lights;
360 watts total |
DC200
150 ft² |
2 HP;
1210 CFM |
208-230/460 V
3 Phase, 60 Hz
5.6/2.8 FLA |
| HDP6060 |
4 lights;
360 watts total |
DC200
150 ft² |
2 HP;
1210 CFM |
208-230/460 V
3 Phase, 60 Hz
5.6/2.8 FLA |
| HDP9648 |
8 lights;
1080 watts total |
DC500
225 ft² |
5 HP;
1585 CFM |
208-230/460 V
3 Phase, 60 Hz
14.0/7.0 FLA |
