Portable Sandblasting Equipment

KF150DM
additional models below

Kramer Portable Pressure Blasters come in seven popular sizes and feature a portable tank design for ease of movement. As premium model portable sandblast equipment, the Model KF300 handles the big, heavy production jobs with its 250-300 lb abrasive capacity and 1 to 2¹/2 hour blasting time. A solid portable sandblast machine, the Model KF110 is the ideal time and labor saver with 90-110 lb abrasive capacity and a 35-50 minute blasting time. Model KF65 is small and efficient with a 50-65 lb abrasive capacity and a 20-30 minute blasting time.

An Air Filter Moisture Separator is included with some models of the PPB portable sandblast machines and is optional on others. A moisture separator will filter excess water from the incoming air supply.

Our quality sandblasting equipment is designed with safety in mind. A pressure gauge monitors internal vessel pressure. The abrasive material metering valve is easily closed for operator safety. Shut-off is quick and simple. All tips and nozzles are tough and durable.

For the utmost in operator safety, we recommend the use of the special light-duty vented blast hood that is supplied with all pressure blasters. Heavy-duty canvas and air-supplied hoods are optional, available protection. Gloves provide an extra margin of safety.

Features:

• Portable tank design for ease of movement
• Seven popular sizes
• Recessed top for easy loading
• Semi-automatic, pull-up tank closure
• Adjustable abrasive flow valve
• Choke valve and pressure gauges
• Hood and extra nozzles included
• Just add air and abrasive
• Can be operated at 7 CFM with ³/32" nozzle; 25-30 CFM recommended for optimal performance
• Two control systems
• A pressure relief valve and a pressure relieving ball valve that meet OSHA requirements

Deadman System (DM)

Automatic shut off if the handle is dropped. Abrasive flow is sealed at the nozzle end by a square sealing block. Abrasive hose remains pressurized. Full control of blasting at the handle. Heavy duty design, few wear components, economical.

Remote System (R)

Automatic shut off if the handle is dropped. Abrasive flow is sealed at the tank using a diaphragm abrasive valve. Abrasive hose is relieved of pressure during shut-off. Shut-off is pneumatically operated at the handle. Full control of blasting at the handle.

* Note: Blast area coverage per/minute and abrasive consumption are approximate guidelines. Abrasive material used and surface blasted may alter coverage and consumption.

click on highlighted model number to view picture

An abrasive blaster is an efficient time-saving piece of equipment, but like other machinery, you must observe specific safety procedures when operating it. Always wear proper eye protection, respiratory protection, and proper protective clothing when operating an abrasive blaster. Never point an abrasive blaster at another person.

When first assembling an abrasive blaster, be sure to tighten all connections. Check all connections every 10 operating hours for worn parts. Replace any worn parts with original Kramer parts. Do not exceed 125 PSI in pressure blasters and never touch the pull-up closure while the tank is pressurized.