Kramer Industries Inc. > Air-Fed Helmet Features > Oil-Less Air Pump Features

Oil-Less Air Pump Features

The oil-less air pump is available for one operator with a 3/4 HP electric motor. This air pump is designed for NIOSH approved air supplied helmets that operate at 10 psi or less. The inlet must be placed in a clean, breathable location,air-pump free from exhausts, fumes and dust. The air pump will not remove carbon monoxide or toxic gases from incoming air pumps to the helmets.

The air pump requires a 110-115V, 60Hz, 14 amp power supply and has an air outflow of 9 cfm at 10 psi. The 600LP Air-Fed Helmet used with the air pump and is connected using the 1/2” air hose. No compressor is necessary when using this oil-less air pump and 600LP air-fed helmet.

When a project needs finishing, start here. The last stop for all your surface finishing needs.