Kramer Industries, Inc. Mass Finishing Equipment and Supplies. 1-888-515-9443 Home Home Home ShopTalk Blog Search Help Cart Contact
Right From The Start - Call us at 1-888-515-9443
ShopTalk Forum

Burnishing Aluminum Oxide Ceramic

Discussions about wet and dry barrel finishing processes, equipment and techniques.

Burnishing Aluminum Oxide Ceramic

Postby Ken » Wed Oct 29, 2014 5:48 am

Hi, I'd appreciate if you can give a suggestion about our application:

We are producing ceramic parts.
Material: Aluminum Oxide (roughly %95 purity).
The shape is tube;
Outer Diameter: 6mm, Hole Diameter: 3mm, Lenght 6mm.

Our target is to have smooth and shiney surface,
especially for the inner hole surfaces.
We found a used barrel tumbler machine and wonder if we can use it. Inner surfaces of the barrels are coated with Polyurethane.

The parts already have clean and smooth surfaces but they are not shiney. Shall we use walnut shell with dry application ?

Thanks in advance for your suggestions... Ken
Ken
 
Posts: 1
Joined: Wed Oct 29, 2014 5:35 am

Return to Barrel Finishing



  • Barrel Finishing Systems
  • Vibratory Finsihing Systems
  • Blasting Systems
  • Abrasive Media
  • Tumbling Media
  • Chemical Compounds
  • Parts Separating Systems
  • KramerThinksGreen
  • Finishing Guides
  • Applications
  • Newsworthy
  • Repairs and Services
  • Material Safety Data Sheets
  • Catalog
  • Ordering Information
  • Guarantee
  • Newsletter
  • About Kramer
  • Contact Us
  • We specialize in customizing systems, products and procedures. There are many options and custom systems available. If you don't see something on our web site, please contact us.

    1-888-515-9443

  • Secured by Rapid SSL. 128 bit SSL Security. $10,000 Warranty.