Titanium Stents
Finishing medical parts requires very stringent testing and results to ensure that the parts are deburred properly. Titanium stents are inserted ... Read MoreFinishing Pewter
Pewter is a soft, malleable metal consisting primarily of tin. Decorative plates, jewelry, figurines and even keys (see picture below) can ... Read MoreThermoplastic Polishing
Before This small polyamide, thermoplastic resin, hardened part had a rough surface finish as well as flashing that needed to be ... Read MoreAluminum Pre-Anodize Finish
Creating an appropriate edge and surface finish on extruded and cut aluminum parts that need to be anodized requires both deburring ... Read MoreDry Tumbling Plastic
Tumbling nylon plastic parts to produce a polished finish can be difficult since the tumbling process itself often leads to small ... Read MoreFinishing Aluminum Parts
Deburred Deburring and polishing aluminum is almost always a multi-step process. The aluminum part pictured above was deburred using an aggressive ... Read MoreDeflashing Fiberglass
Heavy flashing on edges This molded fiberglass part has heavy flashing on the edges that needs to be removed more efficiently ... Read MoreCartridge Reloading
Manufacturers of ammunition have been working overtime to try to meet the recent surge in demand. Due to lack of supply, ... Read MorePolishing Silver Plate
Plating involves the deposition of thin films of metal onto other surfaces. Tumbling plated products can be a challenge to achieve ... Read MoreCompounds are Key
Selecting the appropriate compounds for a vibratory tumbling process will have dramatic effects on the performance of the process and the ... Read MoreDeflashing Plastic Parts
Molded plastics often contain flashing that needs to be removed. This is referred to as plastic deflashing. While there are many ... Read More